Buy / Order Propshield 
    What is Propshield?    Benefits    FAQ    Application    Retailer Search    Trade Enquiries

Shipping    Testimonials    Returns Policy    Terms & Conditions    Site Map


Method B - Application Guide

Suitable for painted surfaces as well as all metal surfaces and is applied using mineral spirits (white spirit) as a penetration catalyst (Note that more detailed written instructions for both methods are included with your Propshield purchase along with further detailed precautions). Further application photos can be seen here.

The below example/guide shows Propshield being applied to a bronze propeller.

                 
 

STEP 1

Surface Preparation:
First clean the metal surface

 

STEP 2

Dissolve a small amount of
Propshield into a plastic container
with mineral spirits

 
 

 
     
               
 

STEP 4

Again dilute Propshield with approximately
5% to 15% White Spirit

(or melt Propshield with a heatgun or by dropping a
tub of Propshield into a bowl/tub of hot water)

 

STEP 3

On a rag wipe the Propshield
& mineral spirit mixture onto the
blade until a very thin film is applied
and then with a rag work vigorously
into the surface.

 
 

 
     
               
 

STEP 5

Now brush on a second
thicker coat

 

STEP 6

The job is now completed and
the vessel is ready to launch.
 

 
 

 
     
                 

2018 Propshield All Rights Reserved | Returns Policy | Privacy Policy | Terms and Conditions | Site Map | Contact Us